View LP156WH2-TLC1_6581607.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1/ 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 specification for approval 15.6? hd tft lcd title model hp customer *when you obtain standard approval, please use the above model name without suffix lp156wh2 *model tlc1 suffix lg display co., ltd. supplier ) ) ( ( final specification preliminary specification please return 1 copy for your confirmation with your signature and comments. / / / signature approved by products engineering dept. lg display co., ltd prepared by reviewed by signature approved by k. s. kwon / s.manager c. i. kim / manager prepared by reviewed by signature approved by k. s. kwon / s.manager b. t. jang / engineer j. k. han / engineer www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 2/ 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 contents 20-22 appendix. lpl proposal for system cover design a 8-9 lvds signal timing specification 3-3 28-30 appendix. enhanced extended display identification data a 26-27 precautions 9 11 7 interface connections 3-2 color input data refernece 3-5 25 designation of lot mark 8-1 25 packing form 8-2 packing 8 24 emc 7-2 1 cover 2 contents 3 record of revisions 4 general description 1 5 absolute maximum ratings 2 electrical specifications 3 6 electrical charactreistics 3-1 10 signal timing specifications 3-3 10 signal timing waveforms 3-4 12 power sequence 3-6 13-15 optical sfecifications 4 16-19 mechanical characteristics 5 23 reliablity 6 international standards 7 24 safety 7-1 page item no www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 3/ 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 record of revisions update front & rear view drawings 17, 18 final draft - jan. 30. 2009 1.0 - update rear view drawing 18 sep. 18. 2008 0.1 1.0 updated edid data 1) added color coordinate 2) checksum : 4c 56 28-30 0.1 update edid data (checksum : 4c) 29-31 dec. 12. 2008 0.5 0.0 change pin assignment (#22, 25, 28 : nc ? gnd) 7 oct. 28. 2008 0.2 updated electrical characteristics (added led electrical characteristics) 6 dec.05. 2008 0.4 add rear view ? circuit component placement 19 oct. 31. 2008 0.3 update edid data (checksum : 2c) 28-30 - edid ver added gray scale 14 added color coordinate 13 updated power sequence(added led sequence) 12 first draft (preliminary specification) - sep. 12. 2008 0.0 description page revision date revision no www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 4/ 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 1. general description general features hard coating(3h), glare treat ment of the front polarizer surface treatment 6-bit, 262,144 colors color depth 1366 horiz. by 768 vert. pixels rgb strip arrangement pixel format 200 cd/m 2 (typ.5 point) luminance, white total 4.8 watt(typ.) @ lcm circuit 1.3 watt(typ.), b/l input 3.5 watt(typ.) power consumption 450g (max.) weight transmissive mode, normally white display operating mode yes rohs comply 0.252mm 0.252 mm pixel pitch 359.3(h, typ) 209.5(v, typ) 5.5(d,max) [mm] outline dimension 15.6 inches diagonal active screen size the lp156wh2 is a color active matrix liquid crystal display with an integral light emitting diode (led) backlight system. the matrix employs a-si thin film tr ansistor as the active element. it is a transmissive type display operating in the norma lly white mode. this tft-lcd has 15.6 inches diagonally measured active display area with hd resolution(768 vertical by 1366 horizontal pixel array). each pixel is divided into red, green and blue sub-pixels or dots which are arranged in vertical stripes. gray scale or the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of more than 262,144 colors. the lp156wh2 has been designed to apply the interface method that enables low power, high speed, low emi. the lp156wh2 is intended to support applications where thin thickness, low power are critical factors and graphic displays are important. in combination with the vertical arrangement of the sub-pixels, the lp156wh2 characteristics provide an excellent flat display for office automation products such as notebook pc. control & data power edid signal & power tft-lcd panel (1366 x 768) 1 768 1 1366 cn 1 user connector 40 pin power block edid block gip(gate in panel) source driver circuit led backlight ass ? y lvds &= timing control block led driver www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 5/ 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 2. absolute maximum ratings the following are maximum values which, if exceeded, may cause faulty operation or damage to the unit. table 1. absolute maximum ratings storage operation 10 20 30 40 50 60 70 80 0 -20 dry bulb temperature [ ] 10 % 20 % 40 % 60 % 90% 80% 0 10 20 30 40 50 60 wet bulb temperature [ ] humidity[(%)rh] units 1 %rh 90 10 h op operating ambient humidity 1 %rh 90 10 h st storage humidity 1 c 60 -20 h st storage temperature 1 c 50 0 t op operating temperature at 25 5 c vdc 4.0 -0.3 vcc power input voltage max min parameter notes values symbol note : 1. temperature and relative humidi ty range are shown in the figure below. wet bulb temperature should be 39 c max, and no condensation of water. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 6/ 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 3. electrical specifications 3-1. electrical characteristics table 2. electrical characteristics 2. this impedance value is needed to proper display and measured form lvds tx to the mating connector. 3. the specified led current and power consumption are under the vled = 12.0v , 25 , dimming of max luminance whereas white pattern is displayed and fv is the frame frequency. 4. the operation of led driver below minimum dimming ratio may cause flickering or reliability issue. 5. this spec. is not effective at 100% dimming ra tio as an exception because it has dc level equivalent to 0hz. in spite of acceptable range as defined, the pwm frequency should be fixed and stable for more consistent brightness control at any specific level desired. 6. the life time is determined as the time at which brig htness of lcd is 50% compare to that of initial value at the typical led current. these led backlight has 6 strings on it and the typical current of led?s string is base on 19ma. note) 1. the specified icc current and power consumption are under the vcc = 3.3v , 25 , fv = 60hz condition whereas mosaic pattern is displayed and fv is the frame frequency. 2 110 100 90 z lvds lvds impedance k 60 40 20 z pwm pwm impedance 4 % 100 - 12.5 - pwm dimming (duty) ratio ma - - - i led_p led power inrush current 3 w - 3.5 - p led led power consumption v 0.5 - 0 v led_en_l led_en low voltage 6 hrs - - 12,000 life time v 5.3 - 3.0 v led_en_h led_en high voltage v 5.3 - 3.0 v pwm_h pwm high level voltage 3 ma - 290 - i led led power input current v 20.0 12.0 7.0 v led led power input voltage ma 1500 - - i cc_p power supply inrush current backlight : ( with led driver) v 0.5 - 0 v pwm_l pwm low level voltage 5 hz 10000 - 200 f pwm pwm frequency 1 ma 445 385 - 1 w 1.5 1.3 - p cc power consumption v 3.6 3.3 3.0 v cc power supply input voltage i cc power supply input current logic : parameter symbol max typ min notes unit values the lp156wh2 requires two power inputs. the first logic is employed to power the lcd electronics and to drive the tft array and liquid crysta l. the second backlight is the input about led bl.with led driver. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 7/ 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 3-2. interface connections table 3. module connector pin configuration (cn1) no connection nc 30 led power supply (7v-20v) vled 40 led power supply (7v-20v) vled 39 led power supply (7v-20v) vled 38 no connection nc 37 backlight on/off control bl_on 36 pwm for luminance control blim 35 no connection nc 34 led ground vled_gnd 33 led ground vled_gnd 32 no connection nc 20 ground gnd 19 positive lvds differential clock input odd_clkin+ 18 negative lvds differential clock input odd_clkin- 17 ground gnd 16 positive lvds differential data input odd_r in 2+ 15 negative lvds differential data input odd_r in 2- 14 ground gnd 13 positive lvds differential data input odd_r in 1+ 12 negative lvds differential data input odd_r in 1- 11 led ground vled_gnd 31 power supply, 3.3v typ. vcc 2 power supply, 3.3v typ. vcc 3 ddc 3.3v power v eedid 4 no connection nc 5 ddc clock clk eedid 6 ddc data data eedid 7 positive lvds differential data input odd_r in 0+ 9 no connection nc 1 negative lvds differential data input odd_r in 0- 8 ground gnd 10 ground gnd 22 no connection nc 23 no connection nc 24 ground gnd 25 no connection nc 26 no connection nc 27 ground gnd 28 no connection nc 29 notes description symbol pin nc no connection 21 1, interface chips 1.1 lcd : sw, sw0624 (lcd controller) including lvds receiver 1.2 system : thc63lvdf823a or equivalent * pin to pin compatible with lvds 2. connector 2.1 lcd :20455-040e-0x, i-pex or its compatibles 2.2 mating : 20453-040t-0x, i-pex or equivalent. 2.3 connector pin arrangement 1 40 [lcd module rear view] this lcd employs one interface connections, a 40 pin c onnector is used for the module electronics interface and led driver. the electronics interface connector is a model 20455-040e-0x manufactured by i-pex. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 8/ 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 notes unit max min symbol description 85mhz > fclk 65mhz ps + 400 - 400 t skew lvds clock to data skew margin - - - 65mhz > fclk 25mhz % 3 - f dev maximum deviation of input clock frequency during ssc khz 200 - f mod maximum modulation frequency of input clock during ssc -1/7 - 600 t clk + 1/7 t skew_eo lvds clock to clock skew margin (even to odd) ps + 600 t skew - v 2.1 0.3 v in lvds input voltage range - v 1.8 0.6 v cm lvds common mode voltage - mv 600 100 |v id | lvds differential voltage notes unit max min symb ol description 3-3-1. dc specification 3-3-2. ac specification 3-3. lvds signal timing specifications www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 9/ 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 < clock skew margin between channel > < lvds data format > 3-3-3. data format 1) lvds 1 port < spread spectrum > time f center f max f min f mod 1 f center * f dev freq. g0 r5 r4 r3 r2 r1 r0 b1 b0 g5 g4 g3 g2 g1 de vsync hsync b5 b4 b3 b2 x b7 b6 g7 g6 r7 r6 r1 r0 g2 g1 b3 b2 r7 r6 g0 b1 de x current (nth ) cycle r5 r4 b0 g5 vsync hsync b7 b6 r3 r2 g4 g3 b5 b4 g7 g6 previous (n-1)th cycle next (n+1)th cycle rclk+ ra+/- rb+/- rc+/- rd+/- www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 10 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 3-4. signal timing specifications table 6. timing table this is the signal timing required at the input of the us er connector. all of the interface signal timing should be satisfied with the following specifications and spec ifications of lvds tx/rx for its proper operation. 3-5. signal timing waveforms condition : vcc =3.3v low: 0.3vcc high: 0.7vcc data enable, hsync, vsync hsync data enable vsync data enable t wh t hp t hfp t hbp t vp t wv t vbp t vfp t wha t wva t clk 0.5 vcc dclk 768 768 768 t wva width-active 1366 1366 1366 t wha width-active tclk 124 80 72 t hbp horizontal back porch 48 48 8 t hfp horizontal front porch thp 20 14 8 t vbp vertical back porch 5 3 1 t vfp vertical front porch thp 801 790 779 t vp period 8 5 2 t wv width 40 32 23 t wh width tclk 1586 1526 1470 t hp period hsync vsync data enable mhz - 72.3 - f clk frequency dclk note unit max typ min symbol item www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 11 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 3-6. color input data reference the brightness of each primary color (red,green and blue) is based on the 6-bit gray scale data input for the color ; the higher the binary input, the brighter the color. the table below provides a reference for color versus data input. table 7. color data reference 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (00) green 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 green (01) ? ? ? ... 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 green (62) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 green (63) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (00) red 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 red (01) ? ? ? ? 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 red (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 red (63) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 blue (01) ? ? ? ? 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (62) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 blue (63) blue (00) white yellow magenta cyan blue green red black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 basic color 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 blue msb lsb green msb lsb red msb lsb b5 b4 b3 b2 b1 b0 g5 g4 g3 g2 g1 g0 r5 r4 r3 r2 r1 r0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue color input color data www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 12 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 note) 1. valid data is data to meet ?3-3. lvds signal timing specifications? 2. please avoid floating state of interface signal at invalid period. 3. when the interface signal is invalid, be sure to pull down the power supply for lcd vcc to 0v. 4. led power must be turn on after power supply for lcd and interface signal are valid. table 6. power sequence table 3-7. power sequence t 6 interface signal, v i lvds power supply input vcc 90% 10% 10% 0v 90% t 1 t 2 t 5 t 7 t 3 t 4 0v dimming control signal of led bl pwm 0v (low) t 8 led input voltage vled t 10 led on/off control signal led_en t 11 t 9 valid data 0v valid data 0v (off) ms 100 - 50 t 8 ms 100 - 0 t 9 ms 100 - 0 t 10 ms 50 - 0 t 5 ms - - 200 t 4 ms 100 - 50 t 11 ms - - 400 t 7 ms 10 - 3 t 6 ms - - 200 t 3 ms 50 - 0 t 2 ms 10 - 0.5 t 1 max. typ. min. units value parameter www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 13 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 4. optical specification fig. 1 optical characteristic measurement equipment and method table 9. optical characteristics ta=25 c, vcc=3.3v, f v =60hz, f clk = 72.3mhz, i led = 19ma 5 viewing angle color coordinates 4 ms - 16 - tr r + tr d response time 0.132 0.102 0.072 by 0.343 0.313 0.283 wx white y axis, down ( =270 ) y axis, up ( =90 ) x axis, left ( =180 ) x axis, right( =0 ) degree - - 40 r degree - - 40 l degree - - 10 u degree - - 30 d blue 0.359 0.329 0.299 wy 6 gray scale green red 0.365 0.335 0.305 gx 0.614 0.584 0.554 gy 0.648 0.618 0.588 rx 0.385 0.355 0.325 ry 3 1.6 1.4 - white luminance variation 0.180 0.150 0.120 bx max typ min 1 - - 500 cr contrast ratio 2 cd/m 2 - 200 170 l wh surface luminance, white parameter symbol notes units values lcd module optical stage(x,y) pritchard 880 or equivalent 50cm optical characteristics are determined after the unit has been ?on? and stable for approximately 30 minutes in a dark environment at 25 c . the values specified are at an approximate distance 50cm from the lcd surface at a viewing angle of and equal to 0 . fig. 1 presents additional information conc erning the measurement equipment and method. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 14 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 100 l63 74.17 l55 12.21 l23 21.01 l31 34.82 l39 52.49 l47 5.36 l15 1.45 l7 0 l0 luminance [%] (typ) gray level note) 1. contrast ratio(cr) is defined mathematically as surface luminance with all white pixels contrast ratio = surface luminance with all black pixels 2. surface luminance is the average of 5 point across the lcd surface 50cm from the surface with all pixels displaying white. for more information see fig 1. l wh = average(l 1 ,l 2 , ? l 5 ) 3. the variation in surface luminance , the panel total variation ( white ) is determined by measuring l n at each test position 1 through 13 and then defined as followed numerical formula. for more information see fig 2. maximum(l 1 ,l 2 , ? l 13 ) white = minimum(l 1 ,l 2 , ? l 13 ) 4. response time is the time required for the display to transition from white to black (rise time, tr r ) and from black to white(decay time, tr d ). for additional information see fig 3. 5. viewing angle is the angle at which the contra st ratio is greater than 10. the angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the lcd surface. for more information see fig 4. 6. gray scale specification * f v = 60hz www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 15 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 fig. 4 viewing angle normal y eye = 0 , right = 180 , left = 270 , down = 90 , up fig. 3 response time the response time is defined as the following figure and shall be measured by switching the input signal for ?black? and ?white?. tr r tr d 100 90 10 0 % optical response white black white : active area a : h/4 mm b: v/4 mm points: 13 points h,v active area 1 3 2 5 4 h a b v 678 910 11 12 13 10mm 10mm fig. 2 luminance www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 16 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 5. mechanical characteristics the contents provide general mechanical characteristic s for the model lp156wh2. in addition the figures in the next page are detailed mechanical drawing of the lcd. 193.536 mm vertical hard coating(3h), glare treatment of the front polarizer surface treatment 450g (max.) weight 197.1 0.5mm vertical 209.5 0.5mm vertical 5.5mm (max) thickness 344.232 mm horizontal active display area 349.8 0.5mm horizontal bezel area 359.3 0.5mm horizontal outline dimension www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 17 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 note) unit:[mm], general tolerance: 0.5mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 18 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 note) unit:[mm], general tolerance: 0.5mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 19 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 [ detail description of side mounting screw ] notes : 1. screw plated through the method of non-electrolytic nickel plating is preferred to reduce possibility that results in vertical and/or horizontal line defect due to the conductive particles from screw surface. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 20 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 lpl proposal for system cover design.(appendix) define define 1. rear side of lcm is sensitive agains t external stress,and previous check about interference is highly needed. 2.in case there is something from system cover comes into the boundary above,mechanical interference may cause the fos defects. (eg: ripple, white spot..) check if antenna cable is sufficiently apart from t-co n of lcd module. 2 1 gap check for securing t he enough gap between lcm and system cover. no good good 1.if system antenna is overlapped with t-con,it might be cause the noise. max thickness a boundary line sponge system cover lcm reflector side www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 21 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 lpl proposal for system cover design. 1.cof area needs to be handled with care. define 1 .at least 2.0mm of gap needs to be secured to prevent the shock related defects. define 2.?l? type of hinge is recommend ed than ?i? type under shock test. 2.good ? wire path design to system side. ok ? wire path is located between cofs. bad ? wire path overlapped with cof area. 4 3 gap check for securing the enough gap between lcm and system hinge. checking the path of the system wire. (?i? type) (?l? type) cof (d-ic) hinge gap:min2.0mm side mount screw hole (4ea) ok bad good #1 #2 #3 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 22 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 lpl proposal for system cover design. 1.cnt area is specially sensitive against external stress,and ad ditional gap by cutting on system cover will be helpful on removing the ripple. 2.using a thinner cnt will be better. (eg: fpc type) define 1.condition without bracke t is good for mechanical noise,and can minimize the light leakage from deformation of bracket. define 2.the results shows that there is no difference between the condition with or without bracket. securing additional gap on cnt area.. 6 5 using a bracket on the top of lcm is not recommended. with bracket without bracket user connector cable pathway. system cover inner side. user connector area. fpc:flexible printed circuit. cut a a-1 a~a-1 bracket www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 23 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 6. reliability environment test condition { result evaluation criteria } there should be no change which might affect the practical display function when the display quality test is conducted under normal operating condition. 0 ~ 10,000 feet (3,048m) 24hr 0 ~ 40,000 feet (12,192m) 24hr altitude operating storage / shipment 7 half sine wave, 180g, 2ms one shock of each six faces(i.e. run 180g 2ms for all six faces) shock test (non-operating) 6 sine wave, 10 ~ 500 ~ 10hz, 1.5g, 0.37oct/min 3 axis, 1hour/axis vibration test (non-operating) 5 ta= 0 c, 240h low temperature operation test 4 ta= 50 c, 50%rh, 240h high temperature operation test 3 ta= -20 c, 240h low temperature storage test 2 ta= 60 c, 240h high temperature storage test 1 conditions test item no. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 24 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 7. international standards 7-1. safety 7-2. emc a) ansi c63.4 ?methods of measurement of radio- noise emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. ?american national standards institute(ansi), 1992 b) c.i.s.p.r ?limits and met hods of measurement of radio interf ace characteristics of information technology equipment.? international special committee on radio interference. c) en 55022 ?limits and methods of measurement of radio interface characteristics of information technology equipment.? european committee for electrotechnical standardization.(cenelec), 1998 ( including a1: 2000 ) a) ul 60950-1:2003, first edition, underwriters laboratories, inc., standard for safety of information technology equipment. b) can/csa c22.2, no. 60950-1-03 1 st ed. april 1, 2003, canadian standards association, standard for safety of information technology equipment. c) en 60950-1:2001, first edition, european committee for electrotechnical standardization(cenelec) european standard for safety of information technology equipment. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 25 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 8. packing 8-2. packing form a) package quantity in one box : 20 pcs b) box size : 482 x 358 x 275 8-1. designation of lot mark a) lot mark abcdefghi jklm a,b,c : size(inch) d : year e : month f ~ m : serial no. note 1. year 2. month mark year 0 2010 6 2006 7 2007 8 2008 9 2009 4 2004 5 2005 3 2 1 2003 2002 2001 b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 3 2 1 dec mar feb jan b) location of lot mark serial no. is printed on the label. the label is attached to the backside of the lcd module. this is subject to change without prior notice. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 26 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 9. precautions please pay attention to the followings when you use this tft lcd module. 9-1. mo unting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so that uneven force (ex. twisted stress) is not applied to the module. and the case on which a module is mounted s hould have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protective plat e to the surface in order to protect the polarizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials for the cover case are not desirable because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gently wi th absorbent cotton or other soft materials like chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possib le. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions (1) the spike noise causes the mis-operation of circuits. it should be lower than following voltage : v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lower temperature, it becomes longer.) (3) brightness depends on the temperature. (in lower temperature, it becomes lower.) and in lower temperature, response time(required time that brightness is stable after turned on) becomes longer. (4) be careful for condensation at sudden temperatur e change. condensation makes damage to polarizer or electrical contacted parts. and after fadi ng condensation, smear or spot will occur. (5) when fixed patterns are displayed for a l ong time, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimized the interference. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 27 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make certain that treatment persons are connected to ground through wris t band etc. and don?t touch interface pin directly. 9-3. electrostatic discharge control strong light exposure causes degradation of polarizer and color filter. 9-4. precautions for strong light exposure 9-5. storage (1) when the protection film is peeled off, static el ectricity is generated between the film and polarizer. this should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) the protection film is attached to the polarizer with a small amount of glue. if some stress is applied to rub the protection film against the polarizer during the time you peel off the film, the glue is apt to remain on the polarizer. please carefully peel off the protection film without rubbing it against the polarizer. (3) when the module with protection film attached is stored for a long time, sometimes there remains a very small amount of glue still on the polarize r after the protection film is peeled off. (4) you can remove the glue easily. when the glue remains on the polarizer surface or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane. 9-6. handling precaution s for protection film when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the module to sunlight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contact with any other object. it is recommended that they be stored in the container in which they were shipped. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 28 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 appendix a. enhanced extended di splay identification data (eedid tm ) 1/3 byte# byte# (decimal ) (hex) 000header 0 0 0000 0000 101header f f 1111 1111 202header f f 1111 1111 303header f f 1111 1111 header 404header f f 1111 1111 505header f f 1111 1111 606header f f 1111 1111 707header 0 0 0000 0000 8 08 eisa manufacturer code(3 character id) = lgd 3 0 0011 0000 9 09 compressed ascii e 4 1110 0100 10 0a product code = (01df) d f 1101 1111 11 0b (hex, lsb first) 0 1 0000 0001 12 0c lcd module serial no - preferred but optional (0 if not used) 0 0 0000 0000 vender/ 13 0d lcd module serial no - preferred but optional (0 if not used) 0 0 0000 0000 product id 14 0e lcd module serial no - preferred but optional (0 if not used) 0 0 0000 0000 15 0f lcd module serial no - preferred but optional (0 if not used) 0 0 0000 0000 16 10 week of manufacture 0 0 0000 0000 17 11 year of manufacture = 2008 1 2 0001 0010 18 12 edid structure version # = 1 0 1 0000 0001 edid version/ 19 13 edid revision # = 3 0 3 0000 0011 revision 20 14 video input definition = digital i/p,non tmds crgb 8 0 1000 0000 21 15 max h image size(M)=34.4232cm(34) 2 2 0010 0010 display 22 16 max v image size(M)=19.3536cm(19) 1 3 0001 0011 parameter 23 17 display gamma =2.2 7 8 0111 1000 24 18 feature support(dpms) = active off, rgb color 0 a 0000 1010 25 19 red/green low bits 4e 0100 1110 26 1a blue/white low bits 85 1000 0101 27 1b red x = 0.618 9e 1001 1110 28 1c red y = 0.355 5b 0101 1011 29 1d green x = 0.335 55 0101 0101 color 30 1e green y = 0.584 95 1001 0101 characteristic 31 1f blue x = 0.150 26 0010 0110 32 20 blue y = 0.102 1a 0001 1010 33 21 white x = 0.313 50 0101 0000 34 22 white y = 0.329 54 0101 0100 35 23 established timing i = 00h(if not used) 0 0 0000 0000 established 36 24 established timing ii = 00h(if not used) 0 0 0000 0000 timings 37 25 manufacturer's timings = 00h(if not used) 0 0 0000 0000 38 26 standard timing identification 1 was not used 0 1 0000 0001 39 27 standard timing identification 1 was not used 0 1 0000 0001 40 28 standard timing identification 2 was not used 0 1 0000 0001 41 29 standard timing identification 2 was not used 0 1 0000 0001 42 2a standard timing identification 3 was not used 0 1 0000 0001 43 2b standard timing identification 3 was not used 0 1 0000 0001 44 2c standard timing identification 4 was not used 0 1 0000 0001 standard 45 2d standard timing identification 4 was not used 0 1 0000 0001 timing id 46 2e standard timing identification 5 was not used 0 1 0000 0001 47 2f standard timing identification 5 was not used 0 1 0000 0001 48 30 standard timing identification 6 was not used 0 1 0000 0001 49 31 standard timing identification 6 was not used 0 1 0000 0001 50 32 standard timing identification 7 was not used 0 1 0000 0001 51 33 standard timing identification 7 was not used 0 1 0000 0001 52 34 standard timing identification 8 was not used 0 1 0000 0001 53 35 standard timing identification 8 was not used 0 1 0000 0001 field name and comments value (hex) value (binary) www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 29 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 appendix a. enhanced extended di splay identification data (eedid tm ) 2/3 byte# byte# (decimal ) (hex) 54 36 1366x768 @60? mode pixel clock (lsb) => 72.3mhz 3 e 0011 11 10 55 37 (stored lsb first) 1 c 0001 1100 56 38 horizontal active = 136 6 pixels (lower 8bits) 5 6 0101 0110 57 39 horizontal blanking = 16 0 pixels (lower 8bits) a 0 1 010 0000 58 3a horizontal active : horizontal blanking (upper 4:4bits) 5 0 0 101 0000 59 3b vertical avtive = 768 lines (lower 8bits ) 0 0 0000 0000 60 3c vertical blanking = 22 lines (lower 8bits) 1 6 0001 0110 61 3d vertical active : vertical blanking (upper 4:4bits) 3 0 0011 0000 timing 62 3e horizontal sync. offset = 48 pixels 3 0 0011 0000 descriptor 63 3f horizontal sync pulse width = 32 pixels 2 0 0010 0000 #1 64 40 vertical sync offset = 3 lines : sync width = 5 lines 3 5 0011 0101 65 41 horizontal vertical sync offset/width upper 2bits = 0 0 0 000 00000 66 42 horizontal image size = 344.232mm(344) 5 8 0101 1000 67 43 vertical image size = 193.536mm(194) c 2 1100 0010 68 44 horizontal & vertical image size 1 0 0001 0000 69 45 horizontal border = 0 0 0 0000 0000 70 46 vertical border = 0 0 0 0000 0000 71 47 non-interlaced,normal display,no stereo,digital separate sync,h /v pol negatives 1 9 0001 1001 72 48 flag 0 0 0000 0000 73 49 flag 0 0 0000 0000 74 4a flag 0 0 0000 0000 75 4b data type tag (descriptor defined by manufacturer ) 0 0 0000 0000 76 4c flag 0 0 0000 0000 77 4d descriptor defined by manufacturer 0 0 0000 0000 78 4e descriptor defined by manufacturer 0 0 0000 0000 79 4f descriptor defined by manufacturer 0 0 0000 0000 timing 80 50 descriptor defined by manufacturer 0 0 0000 0000 description 81 51 descriptor defined by manufacturer 0 0 0000 0000 #2 82 52 descriptor defined by manufacturer 0 0 0000 0000 83 53 descriptor defined by manufacturer 0 0 0000 0000 84 54 descriptor defined by manufacturer 0 0 0000 0000 85 55 descriptor defined by manufacturer 0 0 0000 0000 86 56 descriptor defined by manufacturer 0 0 0000 0000 87 57 descriptor defined by manufacturer 0 0 0000 0000 88 58 descriptor defined by manufacturer 0 0 0000 0000 89 59 descriptor defined by manufacturer 0 0 0000 0000 90 5a flag 0 0 0000 0000 91 5b flag 0 0 0000 0000 92 5c flag 0 0 0000 0000 93 5d data type tag ( ascii string ) f e 1111 1110 94 5e flag 0 0 0000 0000 95 5f l 4 c 0100 1100 96 60 g 4 7 0100 0111 97 61 2 0 0010 0000 timing 98 62 d 4 4 0100 0100 description 99 63 i 6 9 0110 1001 #3 100 64 s 7 3 0111 0011 101 65 p 7 0 0111 0000 102 66 l 6 c 0110 1100 103 67 a 6 1 0110 0001 104 68 y 7 9 0111 1001 105 69 manufacturer p/n(if<13 char--> 0ah , then terminate with asc code 0ah , set remainin g c h 0 a 0000 1010 106 6a manufacturer p/n(if<13 char--> 0ah , then terminate with asc code 0ah , set remainin g c h 2 0 0010 0000 107 6b manufacturer p/n(if<13 char--> 0ah, then terminate with as c code 0ah,set remainin g c h 2 0 0010 0000 field name and comments value (hex) value (binary) www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 30 / 30 lp156wh2 liquid crystal display ver. 1.0 jan. 30, 2009 appendix a. enhanced extended di splay identification data (eedid tm ) 3/3 byte# byte# (decimal ) (hex) 108 6c flag 0 0 0000 0000 109 6d flag 0 0 0000 0000 110 6e flag 0 0 0000 0000 111 6f data type tag ( monitor name, stored as ascii ) f c 1111 1100 112 70 flag 0 0 0000 0000 113 71 l 4 c 0100 1100 114 72 p 5 0 0101 0000 115 73 1 3 1 0011 0001 timing 116 74 5 3 5 0011 0101 description 117 75 6 3 6 0011 0110 #4 118 76 w 5 7 0101 0111 119 77 h 4 8 0100 1000 120 78 2 3 2 0011 0010 121 79 - 2 d 0010 1101 122 7a t 5 4 0101 0100 123 7b l 4 c 0100 1100 124 7c c 4 3 0100 0011 125 7d 1 3 1 0011 0001 126 7e extension flag = 00 0 0 0000 0000 extension flag 127 7f checksum 5 6 0101 0110 checksum field name and comments value (hex) value (binary) www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of LP156WH2-TLC1

	To Download LP156WH2-TLC1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .